Kirchhoff thin plates: equations, Wood-Armer moments, circular and rectangular plates, load spreading and wheel loads on slabs. Every formula is checked numerically; straight beam cases open in the beam calculator, already set up.

Strength of materials handbook: notation, conventions and methods

Thin plates: basics and design

Thin plate: stiffness, equation and internal forces

xyhp (x, y)
Flexural rigidityD=Eh312(1−ν2)
Lagrange equationΔΔw=pD (Δ: Laplacian; p: load per unit area)
Bending moments (per unit width)Mx=−D()∂2w∂x2+ν∂2w∂y2) ; My=−D()∂2w∂y2+ν∂2w∂x2)
Twisting momentMxy=−D(1−ν)∂2w∂x∂y
Extreme fibre stressesσ=6Mh2 ; τxy=6Mxyh2
Reaction along a simply supported edgeVx=Qx+∂Mxy∂y ; at corners, concentrated force R=2Mxy (corner uplift)

Reinforcement design moments (Wood-Armer)

xyhp (x, y)
Bottom layerMx*=Mx+|Mxy|;My*=My+|Mxy|
Bottom layer, if M_x* < 0Mx*=0;My*=My+|Mxy2Mx| (and symmetrically if M_y* < 0)
Top layerMx*=Mx−|Mxy|;My*=My−|Mxy|
Top layer, if M_x* > 0Mx*=0;My*=My−|Mxy2Mx| (and symmetrically if M_y* > 0)
ScopeOrthogonal reinforcement along x and y; moments positive when the bottom fibre is in tension. The resulting moments cover every crack direction (Johansen criterion).

Circular plates

Circular plate simply supported on its edge, uniform load q

qaa
Central deflectionw0=(5+ν)qa464(1+ν)D
Moment at the centreMr=Mt=(3+ν)qa216
Tangential moment at the edgeMt=(1−ν)qa28
Rotation at the edgeθ=qa38(1+ν)D

Circular plate clamped on its edge, uniform load q

qaa
Central deflectionw0=qa464D
Moment at the centreMr=Mt=(1+ν)qa216
Fixed-end momentMr=−qa28
Tangential moment at the edgeMt=−νqa28

Simply supported circular plate, point load P at the centre

Paa
Central deflectionw0=(3+ν)Pa216π(1+ν)D
Moments at distance r from the centreMr=P4π(1+ν)ln⁡ar ; Mt=P4π[(1+ν)ln⁡ar+1−ν]
NoteMoments are infinite at the point of application: for a real load, use the case of a load spread over a disc.

Clamped circular plate, point load P at the centre

Paa
Central deflectionw0=Pa216πD
Moments at distance r from the centreMr=P4π[(1+ν)ln⁡ar−1] ; Mt=P4π[(1+ν)ln⁡ar−ν]
Fixed-end momentMr=−P4π

Circular plate, load P spread over a central disc of radius c

P2caa
Moment at the centre, simply supported plateM0=P4π[(1+ν)ln⁡ac+1−(1−ν)c24a2]
Moment at the centre, clamped plateM0=P4π(1+ν)[ln⁡ac+c24a2]
UseWheel load spread down to the mid-plane (equivalent radius c); outside the loaded area, the moments match those of the point load.

Rectangular plates

Rectangular plate simply supported on four sides, uniform load q

qa (x)b (y)
Central deflectionw0=αqa4D
Moments at the centreMx=βxqa2 ; My=βyqa2

Coefficients (ν = 0.3; a: short side, along x), calculated with Navier series:

b / aαβxβy
1,00,004060,04790,0479
1,20,005650,06270,0501
1,40,007080,07550,0502
1,60,008310,08620,0493
1,80,009320,09480,0479
2,00,010130,10170,0464
3,00,012230,11890,0406
4,00,012820,12350,0384
5,00,012970,12460,0377
∞0,013020,12500,0375

Calculate this case

Rectangular plate simply supported on four sides, point load P at the centre

Pa (x)b (y)
Central deflectionw0=αPa2D

Coefficient α (independent of ν), Navier series:

b / aα
1,00,01160
1,20,01356
1,40,01487
1,60,01570
1,80,01621
2,00,01652
3,00,01693
∞0,01696
Moments under the loadInfinite for a point load: see the centred rectangular load below.

Calculate this case

Rectangular plate clamped on four sides, uniform load q

qa (x)b (y)
Central deflectionw0=αqa4D
MomentsM=βqa2 (at the centre along x and y; at the middle of the long sides, edge x = 0; at the middle of the short sides, edge y = 0)

Coefficients (ν = 0.3), calculated by extrapolated finite differences; within 1.2% of Timoshenko’s tables:

b / aαβx centreβy centreβx long sideβy short side
1,00,001270,02290,0229-0,0513-0,0513
1,20,001720,03000,0228-0,0639-0,0554
1,40,002070,03500,0213-0,0726-0,0568
1,60,002300,03820,0193-0,0780-0,0571
1,80,002450,04010,0174-0,0812-0,0571
2,00,002530,04120,0158-0,0829-0,0570
∞0,002600,04170,0125-0,0833–

Calculate this case

Rectangular plate clamped on the long sides, simply supported on the short sides, uniform load q

qa (x)b (y)
Central deflectionw0=αqa4D
MomentsM=βqa2

Coefficients (ν = 0.3), extrapolated finite differences (solver validated on the previous cases):

b / aαβx centreβy centreβx long side
1,00,001920,03320,0244-0,0698
1,20,002220,03740,0216-0,0770
1,40,002410,03990,0189-0,0810
1,60,002520,04120,0168-0,0830
1,80,002580,04180,0153-0,0840
2,00,002610,04210,0142-0,0843
∞0,002600,04170,0125-0,0833
UseDeck slab continuous between longitudinal girders, supported on the cross-beams.

Calculate this case

Local loads on slabs

Spreading of a wheel load down to the mid-plane

Quu₀h_rhrevêtementdalle
Dimensions of the loaded areau=u0+2hr+h ; v=v0+2hr+h
AssumptionSpread at 45° (1 horizontal to 1 vertical) through the surfacing of thickness h_r and through the concrete down to the mid-plane of the slab of thickness h (EN 1991-2, 4.3.6).
ExampleLM1 tandem wheel: u₀ = v₀ = 0.40 m; h_r = 0.08 m; h = 0.25 m → u = v = 0.81 m.
Former French rulesFascicule 61 and BAEL: spread at 37° through the surfacing, i.e. u = u₀ + 1.5 h_r + h.

Calculate this case

Slab simply supported on four sides, load P spread over a centred rectangle u × v

u × va (x)b (y)
Moments at the centreMx=(M1+νM2)P ; My=(M2+νM1)P

Square slab (b = a), centred square load; coefficients for ν = 0, as in Pigeaud’s charts:

u / a = v / bM1 = M2
0,050,2737
0,100,2185
0,200,1634
0,300,1311
0,400,1083
0,500,0906
0,600,0762
0,800,0537
1,000,0368

Rectangular slab b = 2a, centred square load u = v:

u / a = v / aM1M2
0,050,32240,2503
0,100,26710,1952
0,200,21160,1403
0,300,17890,1086
0,400,15520,0865
0,500,13650,0697
0,600,12090,0565
0,800,09500,0369
1,000,07360,0235
MethodNavier series (double sum up to order 1,201); cross-checked by finite differences within 2% and, for a load covering the whole slab, identical to the uniform load case.

Calculate this case

Preliminary design aids, provided for guidance only: they do not replace calculations prepared by an engineer. Found an error, have a suggestion? Write to us.