Effects of a temperature difference between the faces of a beam, beams with stepped inertia. Every formula is checked numerically; straight beam cases open in the beam calculator, already set up.

Strength of materials handbook: notation, conventions and methods

Thermal gradient

Simply supported beam, thermal gradient ΔT

Tsup = T + ΔT/2Tinf = T − ΔT/2ABL
Free thermal curvatureκ=αΔTh with ΔT=Tsup−Tinf (top face warmer: ΔT > 0)
Reactions and momentsR=0;M=0 (statically determinate: free deformation)
Midspan deflectionf=αΔTL28h upwards
Rotations at supportsθA=−θB=αΔTL2h (ends rotating outwards)

Calculate this case

Cantilever, thermal gradient ΔT

Tsup = T + ΔT/2Tinf = T − ΔT/2AL
Free thermal curvatureκ=αΔTh with ΔT=Tsup−Tinf (top face warmer: ΔT > 0)
Reactions and momentsR=0;M=0
Deflection at the tipf=αΔTL22h downwards
Rotation at the tipθ=αΔTLh

Calculate this case

Fixed – pinned beam, thermal gradient ΔT

Tsup = T + ΔT/2Tinf = T − ΔT/2ABL
Free thermal curvatureκ=αΔTh with ΔT=Tsup−Tinf (top face warmer: ΔT > 0)
ReactionsRB=−RA=3EIαΔT2hL (B holds the beam up)
Fixed-end momentMA=3EIαΔT2h (bottom fibre in tension)
Maximum deflectionf=αΔTL227h upwards, at x=2L3 from A

Calculate this case

Fixed – fixed beam, thermal gradient ΔT

Tsup = T + ΔT/2Tinf = T − ΔT/2ABL
Free thermal curvatureκ=αΔTh with ΔT=Tsup−Tinf (top face warmer: ΔT > 0)
ReactionsRA=RB=0
MomentM=EIαΔTh (constant, bottom fibre in tension)
Deflectionf=0

Calculate this case

Two equal spans, thermal gradient ΔT

Tsup = T + ΔT/2Tinf = T − ΔT/2ABCLL
Free thermal curvatureκ=αΔTh with ΔT=Tsup−Tinf (top face warmer: ΔT > 0)
ReactionsRA=RC=3EIαΔT2hL;RB=−3EIαΔThL
Moment at the central supportMB=3EIαΔT2h (bottom fibre in tension)

Calculate this case

Variable inertia

Cantilever with two inertias, point load P at the tip

PI₁I₂AaL − a
InertiasEI1 from A to distance a; EI2 beyond
Fixed-end momentMA=−PL
Deflection at the tipf=P3EI1()L3−(L−a)3}+P(L−a)33EI2
Rotation at the tipθ=P2EI1()L2−(L−a)2}+P(L−a)22EI2

Calculate this case

Simply supported beam stiffened in the middle, point load P at midspan

PI₁I₂I₁ABaL − 2aa
InertiasEI1 over the lengths a next to the supports; EI2 over the central part
Maximum momentMmax=PL4
Midspan deflectionf=P6()a3EI1+L3/8−a3EI2)

Calculate this case

Preliminary design aids, provided for guidance only: they do not replace calculations prepared by an engineer. Found an error, have a suggestion? Write to us.